Rack mounted Embedded BMS 48V LFeLi Battery Lithium iron Phosphate battery (LiFePO4) for FTTH，FTTX

View cart “16core Fiber Optical Terminal CTO/NAP Distribution box with 1×16 PLC Splitter” has been added to your cart.

Rack mounted Embedded BMS 48V LFeLi Battery Lithium iron Phosphate battery (LiFePO4) for FTTH，FTTX

Lithium iron Phosphate battery (LiFePO4) has a nominal voltage of 48VDC. It is comprised by 16 cells of 3.2V each. The internal structure of LiFePO4 battery cell is shown in the figure on the right. Shown is the olivine structure of LiFePO4 as the positive electrode of cell. Aluminum foil functions as current collector of positive pole. A polymer membrane separates positive and negative electrodes of the cell. The electron (e-) can’t pass through the polymer separator

Request Quotation

Category: Fiber Distribution Box

1. The cathode material is Lithium Iron (LiFePO4), which has long cycle life and good safety performance.

2. Integrated BMS provides voltage, current, temperature protection and alarm functions. BMS can communicate with other devices through modbus protocol.

3. Combine the current, voltage, individual surface temperature and ambient temperature of the BMS unit cell.

4. The embedded BMS provides a variety of remote functions, which can communicate with the remote central control center through computer management.

5. The combination of BMS and computer management technology can realize real-time monitoring of various parameters and states.

6. Protection of the power system, when the battery is too low, the system will provide support for the battery to protect the voltage from being too low.

7. Under normal operating conditions, the noise emitted is very small due to the direct cooling design of the system.

8. Good electromagnetic shielding.

On Sale

1 x 8 PLC Fiber Splitter Outdoor 8 port Distribution Box

Widely used in FTTH access network
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks

Original price was: $5.00.Current price is: $4.00.
1.25G 1310nm 20KM 40km sfp optical transceiver sfp module LC connector

The SFP-BIDI transceivers are high performance, cost effective modules supporting data-rate of1.25Gbps and20km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with atrans impedance preamplifier(TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA)and SFF-8472.For further information, please refer to SFP MSA.

SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G

$0.00 – $9.20
On Sale

10-15MM J Hook Suspension Clamp for ADSS Fiber Optic Cable ADSS Suspension Bridge Cable Clamp

Cable Type: FO Round

Cable Span: Span up to 100 meters

Breaking Load (KN): 12 Kn

Suitable for Cable: Ø 10~15mm ADSS cable

Material of Body: Galvanised steel

Insert: UV Protected Neoprene

Screw: Pretected steel

Application: Overhead Line Accessories

Weight:0.17Kgs

Original price was: $1.25.Current price is: $1.20.
10G SFP+ module SM 20KM 40KM 80KM TX/RX 1270/1330nm,single fiber Bidi,LC port DDM SFP transceiver
The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF.
1. Small form factor
2. Hot-swappable
3. Supports various data rates and transmission distances
4. Compatible with multiple networking devices
5. Low power consumption
6. Easy to install and replace
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
$6.50 – $8.90
12 & 24 ports fiber optic distribution box odf

Rack mounted patch panel is designed for fiber connection and distribution of backbone fiber cable; it is suitable for fiber splicing, storage and protection. Their standard 19 inches width make them compatible to standard optical distribution frame with 19 inches width. And it also can be used alone.
12 24 48 Core Outdoor GYTA53 steel Armored optical cable underground directly burial fiber cable singlemode optical cable

1. Factory Price.

2. Life Time Warranty.

3. Fastest Delivery Time: 1-3 days for Samples, 5-15 days for bulk production.

4. 100% test before shipping.

5.OEM/ODM is available.

6. Professional manufacturer. Welcome to visit our company.

$0.25 – $15.88