ZXDU88 S402 (V6.0) system is a DC power supply system with large capacity, consisting of multiple racks and providing –48 VDC
for switching equipment, data products etc.
ZXD5000 rectifiers are installed in the rectifier rack (RECR), It uses advanced switching rectifier technology, with rated input three-phase AC 380VAC, and rated output power is 6kW. The rectifier peak efficiency is higher than 96.2%.
Features of Rectifier ZXD5000 Module:
The peak efficiency of the module is higher than 96.2%,and in the sleep mode, the rectifier output power consumption is lower than 4W.
High power density, saving space and rental
The power density of the rectifier is 25.52W/in3 to save space, helping form a large-capacity power system up to 120kW in one rack.
High compatibility with Powerful expansion capacity
The full output is 360kW and the max configuration of ZXDU88 S402 system consists of four DC distribution racks, three rectifier racks and four AC distribution racks.
Digital design, high Reliability
Rectifier adopts DSP+MCU double digital circuit control and the system adopts CAN+RS485 double bus control. So the system is more reliable and the transmission speed is faster.
Specification:
Application
* GSM/CDMA center station
* Microwave repeat station
* Satellite BSC station
* Transmission equipment
* Other middle/large capacity situation
Key Features:
|
Benefits:
|
The hibernation power is less than 2W.
|
Saves electricity and reduces OPEX.
|
Wide operating temperature of rectifier modules range from -40 to 70°C
|
Highly adaptable to adverse environment saves expenditure for air conditioners.
|
Wide input voltage range from 80 to 300Vac
|
Adaptable to various and unstable power grids.
|
THD is less than 2.8%
|
Minimal interference to equipments on the same commercial power supply.
|
Space efficient cabinet with 400mm depth
|
Save 30% of space than that of the 600mm depth cabinet and reduces Capex
|
Front access design
|
Easy maintenance, the system can be positioned next to wall to save space.
|
RoHS conformed
|
Environmental-friendly
|
-
1 x 8 PLC Fiber Splitter Outdoor 8 port Distribution Box
Original price was: $5.00.$4.00Current price is: $4.00.Widely used in FTTH access network
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks -
1.25G 1310nm 20KM 40km sfp optical transceiver sfp module LC connector
$0.00 – $9.20The SFP-BIDI transceivers are high performance, cost effective modules supporting data-rate of1.25Gbps and20km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with atrans impedance preamplifier(TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA)and SFF-8472.For further information, please refer to SFP MSA.
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
-
10-15MM J Hook Suspension Clamp for ADSS Fiber Optic Cable ADSS Suspension Bridge Cable Clamp
Original price was: $1.25.$1.20Current price is: $1.20.Cable Type: FO Round
Cable Span: Span up to 100 meters
Breaking Load (KN): 12 Kn
Suitable for Cable: Ø 10~15mm ADSS cable
Material of Body: Galvanised steel
Insert: UV Protected Neoprene
Screw: Pretected steel
Application: Overhead Line Accessories
Weight:0.17Kgs
-
10G SFP+ module SM 20KM 40KM 80KM TX/RX 1270/1330nm,single fiber Bidi,LC port DDM SFP transceiver
$6.50 – $8.90The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF.
- Small form factor
- Hot-swappable
- Supports various data rates and transmission distances
- Compatible with multiple networking devices
- Low power consumption
- Easy to install and replace
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
-
12 & 24 ports fiber optic distribution box odf
Rack mounted patch panel is designed for fiber connection and distribution of backbone fiber cable; it is suitable for fiber splicing, storage and protection. Their standard 19 inches width make them compatible to standard optical distribution frame with 19 inches width. And it also can be used alone.
-
12 24 48 Core Outdoor GYTA53 steel Armored optical cable underground directly burial fiber cable singlemode optical cable
$0.25 – $15.881. Factory Price.
2. Life Time Warranty.
3. Fastest Delivery Time: 1-3 days for Samples, 5-15 days for bulk production.
4. 100% test before shipping.
5.OEM/ODM is available.
6. Professional manufacturer. Welcome to visit our company.