$17.50 – $18.00
Catering for different scenarios it provides different interfaces such as FE,GE,VoIP, E1, WiFi,USB and other interfaces to meet the requirements of FTTH,FTTO and FTTB application modes, not only for home user, but also for commercial users.It supports full service operation with high QoS and security, such as HSI, VoIP, IPTV.
Original price was: $50.00.$45.70Current price is: $45.70.
- Small size, light weight.
- Support hot plug function.
- Wide working temperature range.It can fully output power in the temperature range of -5℃ ~ +40℃.
$72.00 – $75.00
- For use as OTDR launch cable
- For use as OTDR receive cable
- Measure insertion loss and reflectance of near- and far-end connections of a fiber optic link using an OTDR
Original price was: $70.00.$60.00Current price is: $60.00.
Original price was: $9.00.$7.50Current price is: $7.50.
Non-sealed type, fixed by bolt. Two cable ports for indoor cable connection Easy for operation, has high containing ability for surplus pigtails Can connect/reconnect to adapters more than 200 times Connector for FC, SC, ST or LC
Original price was: $16.00.$12.00Current price is: $12.00.
Fiber termination cabinet WIDE SCOPE OF APPLICATION -- Used in the integration of the incoming cable and the drop cable, the optical fiber splicing, winding, storage, and distribution.EASY TO IASTALL -- Cables, pigtails, and patch cords pass through their own paths without interfering with each other, and the box type SC/FC/PLC adapter is installed.
The type of this fiber with single-mode G652 G655 G657 or multimode with a loose tube which is made of high modulus plastic .there is used a water-resistant filling compound for filling.
Application: Overhead Line Hardware Material: Stainless Steel 304 cable Type: flat drop cable Stretching Resistance: 4000N Salt Spray Test: 1000h
$1.10
Suspension clamp,Use for ADSS cable,choose the type according to the diameter of ADSS cable.
$1.35 – $1.50
Use: FTTH Operating Temperature (℃): -10 ~ +60 Type: cable clamp
$11.00 – $15.00
Q four-group form factor can be used to directly design the module diagram) These rectangles and 40 SFP+40 interfaces provide a typical application in a usable channel interface. to be able to transmit data and support a data rate of 10Gbps.
Lithium iron Phosphate battery (LiFePO4) has a nominal voltage of 48VDC. It is comprised by 16 cells of 3.2V each. The internal structure of LiFePO4 battery cell is shown in the figure on the right. Shown is the olivine structure of LiFePO4 as the positive electrode of cell. Aluminum foil functions as current collector of positive pole. A polymer membrane separates positive and negative electrodes of the cell. The electron (e-) can't pass through the polymer separator