FTTH IP68 Outdoor Caja NAP Fiber Access Terminal Closure FTTH Distribution Box
Fiber optical distribution box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Indoor Fiber Patch Panel Wall Mount 24 Core Fiber Optic Patch Panel Optical Distribution Frame ODF
HEAVY DUTY: Keystone Patch Panel is designed to mount to any standard 19″ rack or cabinet.
EFFORTLESS INSTALLATION: Install this 48-port patch panel with the included hardware your 19-inch EIA compatible rack, bracket or enclosure. Takes up 1U of rack space.
COMPATIBLE: Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemes.
INSTALLATION HARDWARE INCLUDED: No need to buy additional mounting hardware as the necessary tie wraps and mounting screws included in the package.
NUMBERED PORTS: Bold port numbering enables quick and ready identification of outlet
Feature
1.offer connection between fiber optic cable with pigtails
2 insulation between metal structures and cable-side shell can easily lead to the ground
3 offer enough space for fiber install ion, easy to install
4 have sufficient impact strength of the box, can use for different occasions,
5 different kinds of installing ways.
Spcefication
1.fast delievery
2.two years warranty
3.hot selling products
4.ODF (Optical Distribution Frame)
5.available for the adaptors installation such as FC,SC,ST,LC
Technology
The high-brightness light source is
used to illuminate the fiber, and the fiber is imaged on the CMOS sensor via a special microscope
Related Products
-
1 x 8 PLC Fiber Splitter Outdoor 8 port Distribution Box
Original price was: $5.00.$4.00Current price is: $4.00.Widely used in FTTH access network
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks -
1.25G 1310nm 20KM 40km sfp optical transceiver sfp module LC connector
$0.00 – $9.20The SFP-BIDI transceivers are high performance, cost effective modules supporting data-rate of1.25Gbps and20km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with atrans impedance preamplifier(TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA)and SFF-8472.For further information, please refer to SFP MSA.
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
-
10-15MM J Hook Suspension Clamp for ADSS Fiber Optic Cable ADSS Suspension Bridge Cable Clamp
Original price was: $1.25.$1.20Current price is: $1.20.Cable Type: FO Round
Cable Span: Span up to 100 meters
Breaking Load (KN): 12 Kn
Suitable for Cable: Ø 10~15mm ADSS cable
Material of Body: Galvanised steel
Insert: UV Protected Neoprene
Screw: Pretected steel
Application: Overhead Line Accessories
Weight:0.17Kgs
-
10G SFP+ module SM 20KM 40KM 80KM TX/RX 1270/1330nm,single fiber Bidi,LC port DDM SFP transceiver
$6.50 – $8.90The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF.
- Small form factor
- Hot-swappable
- Supports various data rates and transmission distances
- Compatible with multiple networking devices
- Low power consumption
- Easy to install and replace
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
-
12 & 24 ports fiber optic distribution box odf
Rack mounted patch panel is designed for fiber connection and distribution of backbone fiber cable; it is suitable for fiber splicing, storage and protection. Their standard 19 inches width make them compatible to standard optical distribution frame with 19 inches width. And it also can be used alone.
-
12 24 48 Core Outdoor GYTA53 steel Armored optical cable underground directly burial fiber cable singlemode optical cable
$0.25 – $15.881. Factory Price.
2. Life Time Warranty.
3. Fastest Delivery Time: 1-3 days for Samples, 5-15 days for bulk production.
4. 100% test before shipping.
5.OEM/ODM is available.
6. Professional manufacturer. Welcome to visit our company.