Listen to the whispers of the world,
Professional fiber optic communication service company offering solutions such as FTTH and FTTX.
5GHz 23dBi 11ac Outdoor CPE
O8 adopts of the independent power amplifier and 23dBi vertical polarization directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 20km.
20km+ transmission Rang
O8 adopts of the independent power amplifier and 23dBi dual polarization direc tional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 20km
CPE Assistant-Centralized Management Platform
O8 equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - CPE Assistant. Func tions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using CPE Assistant
5GHz Outdoor CPE
Professional-grade lightning protection
Better Performance with TD-MAX
The O8 5GHz 802.11ac Outdoor CPE, equipped with a 23dBi directional vertically polarized antenna, is engineered for point-to-point (PtP) and point-to-multipoint (PtMP) wireless deployments. It caters to private ISPs, video surveillance systems, and long-haul data transmission needs, delivering reliable connectivity over distances of up to 20 kilometers. Thanks to its built-in auto-bridging functionality, pairing two units requires minimal manual intervention, streamlining on-site installation and deployment.
- 5GHz 11ac 433Mbps
- One fast ethernet port
- 23dbi directional antenna
- IP65 weatherproof enclosure
- 6000V Lightning Protection
- AP,Station,WISP operating mode supported
- 50 meters passive PoE supply for flexible deployment
5GHz 433Mbps
High speed up to 433Mbps 23dBi Antenna
50m flexible deployment
Up to 50 meters offlexible deployment withincluded PoE adapter
20km long distance
Up to 20Km long-distance transmission range
R&D Focus Areas
We focus on several core R&D areas, dedicated to solving key direction challenges in the energy storage sector.
20km+ transmission Rang
O8 adopts of the independent power amplifier and 23dBi dual polarization directional antenna to provide an efficient way to pick up and maintain a stable signal for
a wireless network up to 20km.
6000V Surge Protection Desig
O8 adopts of 6000V ethernet port Surge protection design, It can be more robust in the thunder season
Easy to Assemble and Install
O8 adopts of three-axis alignment, it is easy to assemble in seconds – no tools needed. Only a single screw driver is required for pole mounting.
TD-MAX-TendaTDMA proprietary protocol
The CPE uses highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can’t sense each other, they become“hidden nodes” and cannot coordinate access to the wireless channel.
Channel shift to avoid interferrenc
CPE Assistant-Centralized Management Platform
Equipped with centralized management software that helps users easily
manage all the devices in their network from a single PC – CPE Assistant. Func
tions like device discovery, status monitoring, firmware upgrading, and network
maintenance can be managed using CPE Assistant
R&D Focus Areas
We focus on several core R&D areas, dedicated to solving key direction challenges in the energy storage sector.
| Product Information | |
| Model | O8 |
| Dimension | 391.5 x 280 x 223 mm |
| Deployment | Pole Mount |
| Application Scenarios | PtP and PtMP wireless connection for Privated ISP access or CCTV Surveillance |
| Hardware | |
| Frequency Range | 5GHz |
| Compliant Standards | IEEE 802.11a/n/ac |
| Maximum Wireless Rate | 433 Mbps |
| Interfaces | 1*10/100Mbps Ethernet Port |
| Antenna Polarization | Vertical Polarization |
| Antennas Gain | 23dBi |
| Antenna Beamwidth | Vertical: 10° Elevation: 10° |
| GND | / |
| Reset Button | 1 |
| Power Consumption | 5.5W |
| Waterproof Level | IP65 |
| LED Indicator | PoE/LAN,LED1,LED2,LED3 |
| Power Method | 12V1A Passive PoE |
| Lightning Protection | 6000V |
| Passive PoE | Passive power over ethenet via PoE/LAN(✚4, 5 pins, -7, 8 pins) Voltage range: 9-35V DC |
| Reception Sensitivity | 11a 6Mbps -95dBm±1.5dBm 11n MCS7 HT20 -72dBm±1.5dBm 11ac MCS9 HT80 -64dBm±1.5dBm |
| Software | |
| TDMA | Support |
| Operating Mode | AP/Station/WISP/P2MP/WDS Repeater/Router |
| Enable/Disable Wireless Radio | Support |
| SSID Hidden | Support |
| Wireless Client Isolation | Support |
| SSID Isolation | Support |
| Channel Bandwidth | 20/40/80MHz |
| Channel Shift | Support |
| Wireless Access Control | Support |
| Weak Signal Client Limitation | Support |
| Transmission Power | Adjustable power by 1dBm |
| WMM Capable | Support |
| APSD Capable | Support |
| Wireless Security | 64/128 WEP,WPA-PSK,WPA2-PSK,WPA |
| Transparent Bridge | Support |
| VLAN Tagging for SSID | Support |
| DHCP Server | Support |
| VPN Pass-Through | PPTP, L2TP |
| Remote Web access | Support |
| Schedule Reboot | Support |
| Page Timeout | Support |
| Ping Watchdog | Support |
| Dyndns | noip, dyndns.org |
| Network Diagnoses | Ping, Traceroute, Signal Scan |
| Time | Support |
| Firmware Upgrade | Support |
| Backup/Restore Configuration | Support |
| Username Management | Support |
| System Logs | Support |
| Managed By Controller | PC Software — CPE Assistant |
| Others | |
| Package Contents | 1x 5GHz 23dBi 11ac Outdoor CPE O8 1x Power Adapter 1x PoE Injector 1x Quick Installation Guide |
| Operation Temperature | -30℃ ~ 60℃ |
| Storage Temperature | -40℃ ~ 70℃ |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 10%~90% non-condensing |
| Default Login IP | 192.168.2.1 |
| Default Login Username | admin |
| Default Login Password | admin |
| Certification | FCC/CE/RoHS |
FAQ
Is the Tenda O8 Outdoor CPE fully weatherproof?
Will severe weather impact my signal?
How can I check if my device is transmitting a strong signal?
How do I monitor and adjust settings on my 11ac Outdoor CPE?
The 11ac Outdoor CPE supports the free Tenda app. You can connect via your mobile phone or laptop to modify settings, check signal status, and monitor the device in real time.
How can I install the Tenda app on my mobile device or laptop?
Can I monitor and change settings on my 11ac Outdoor CPE without using the Tenda app?
What kind of settings can I adjust on my 11ac Outdoor CPE using the Tenda app?