DVP765 Handheld Fusion Splicer
Optical fiber touch recognition, automatic heating
Push-pull fiber holder, more suitable
Removable battery, dual-mode power supply, three-mode charging
Colorful breathing lights, different lights show different welding states
Handheld Fusion Splicer DVP 765
The splicer is capable ofdual-directional fusion.
The auto environmental compensation system greatly improves adaptability of the splicer to extreme environments to ensure your work smoothly and continuously
Process
realizes the integration of optics,
mechanics and electronics, and it shall be kept clean and from strong vibration or shock during use
Application
mainly used for
the permanent connection of fiber and is production test of fiber communication engineering and optical passive devices.
Technology
The high-brightness light source is
used to illuminate the fiber, and the fiber is imaged on the CMOS sensor via a special microscope
All-in-one fixer
The all-in-one fixture meet fusion demands of multiple optical fibers, jumpers and rubber-insulated wires with a cladding diameter of 80～150μm.
Graphical interfaces and touch screen
DVP765 uses entirely new GUI and touch screen in design. Operators can set up the splicer and get to know relevant information of it
simply and directly by graphical interfaces.
Intelligent heat shrink
A detection unit is embedded in the heater. The heating function will only be enabled when the protection sleeve is put in the heater, to avoid mishandling.
Pluggable lithium-ion battery of large-capacity
The built-in pluggable lithium-ion battery of large capacity can answer working demand lasting all day long (typical 220 counts of splicing and heating cycles).
Carrying case
The carrying case is novel in design and light in weight, has built-in compact working bench. Open or close the cover can turn it to a working bench.
TYPICAL APPLICATIONS
6481 Optical Fiber Fusion Splicer is compact equipment deploying the design of ergonomics, which delivers convenient operation and handy carrying case. Event very short fibers can be spliced easily. It’s capable of construction and maintenance of optical fiber line projects (including trunk), emergency repair, production and test of optical fiber devices and research and study in institutes.
Related Products
-
1 x 8 PLC Fiber Splitter Outdoor 8 port Distribution Box
Original price was: $5.00.$4.00Current price is: $4.00.Widely used in FTTH access network
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks -
1.25G 1310nm 20KM 40km sfp optical transceiver sfp module LC connector
The SFP-BIDI transceivers are high performance, cost effective modules supporting data-rate of1.25Gbps and20km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with atrans impedance preamplifier(TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA)and SFF-8472.For further information, please refer to SFP MSA.
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
-
10-15MM J Hook Suspension Clamp for ADSS Fiber Optic Cable ADSS Suspension Bridge Cable Clamp
Original price was: $1.25.$1.20Current price is: $1.20.Cable Type: FO Round
Cable Span: Span up to 100 meters
Breaking Load (KN): 12 Kn
Suitable for Cable: Ø 10~15mm ADSS cable
Material of Body: Galvanised steel
Insert: UV Protected Neoprene
Screw: Pretected steel
Application: Overhead Line Accessories
Weight:0.17Kgs
-
10G SFP+ module SM 20KM 40KM 80KM TX/RX 1270/1330nm,single fiber Bidi,LC port DDM SFP transceiver
$6.50The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 80km transmission distance with SMF.
- Small form factor
- Hot-swappable
- Supports various data rates and transmission distances
- Compatible with multiple networking devices
- Low power consumption
- Easy to install and replace
SKU Type:1.25G SFP | 10G SFP+ | 10G XFP | 25G | 40G}100G
-
12 & 24 ports fiber optic distribution box odf
Rack mounted patch panel is designed for fiber connection and distribution of backbone fiber cable; it is suitable for fiber splicing, storage and protection. Their standard 19 inches width make them compatible to standard optical distribution frame with 19 inches width. And it also can be used alone.
-
12 24 48 Core Outdoor GYTA53 steel Armored optical cable underground directly burial fiber cable singlemode optical cable
1. Factory Price.
2. Life Time Warranty.
3. Fastest Delivery Time: 1-3 days for Samples, 5-15 days for bulk production.
4. 100% test before shipping.
5.OEM/ODM is available.
6. Professional manufacturer. Welcome to visit our company.
Only logged in customers who have purchased this product may leave a review.
Related products
Original price was: $700.00.$600.00Current price is: $600.00.
Original price was: $1000.00.$950.00Current price is: $950.00.
Original price was: $4000.00.$3000.00Current price is: $3000.00.
Original price was: $950.00.$900.00Current price is: $900.00.
Reviews
There are no reviews yet.